Passenger Door Window Re-dux

For 2023 I started re-working the passenger door window

the old window motor froze up and the angle of the window

was incorrect to slide into a window channel

As you can see I was able to get the window to go all the way down

without modifying the door frame

I had to modify the motor location and the window rail placement

in order to get the window to flow in front of the frame bolts

and within the 1/2" thinner door skin

After a few iterations of the window rails, location of the window motor

and cutting out the bottom of the door where the rear window rail connects

I was able to slide the window all the way down in a smooth fashion

The following is how I was able to get the window to slide down with the window buttons

in addition the window drops when the door open button is pressed to allow it

to clear the window channel that seals the window to the car body

Window fully retracted into the door

using 4 5-pin relay switches allows the window and door latch to function directly off the battery

there is an additional rain in front of the door, that allows the switch to function

allowing the window to drop then when the switch is activated only the door popper functions

Window fully retracted into door and closed

Window sealed into temp window channel

Window dropped when door open button pressed allowing it to clear channel